The effect of intraoperative immersion solutions on acellular dermal matrix: Biofilm formation and mechanical property

Background Acellular dermal matrix (ADM) is generally used on implant-based breast operations; However, it can increase surgical site infection. Many immersion solutions are applied to ADM, however, the most effective solution is unknown. The purpose of this study is to determine the effect of different solutions on the biofilm formation and mechanical properties of ADM. Methods Aseptic porcine-derived ADMs were immersed in 5 different solutions for 30 min; sterile normal saline, 10% povidone-iodine, 0.5% chlorhexidine, antibiotics (cefazolin, gentamicin, and vancomycin), and taurolidine. They are transferred to 10 ml suspension of methicillin-sensitive/resistant Staphylococcus aureus (MSSA/MRSA) or Staphylococcus epidermidis and an overnight culture was performed. After rinsing and sonication to obtain the biofilm on ADM, colony forming unit (CFU) was measured. In addition, the maximum load before ADM deformation and the elongation length of ADM at the start of the maximum load was determined. Results Regardless of strains, povidone-iodine, chlorhexidine, and taurolidine group had lower CFUs than the saline group with statistical significance. Meanwhile, the antibiotics group did not show statistical difference from the saline group. Moreover, only taurolidine group showed higher tensile strength (MRSA, p = 0.0003; S. epidermidis, p = 0.0023) and elongation length (MSSA, p = 0.0015) than the saline group. The antibiotics and chlorhexidine group yielded lower tensile strength and elongation length than the povidone-iodine and taurolidine groups. Conclusions It was suggested that the 10% povidone-iodine or taurolidine solution is effective. In contrast, the antibiotics solution could be considered as an effective intraoperative solution.