Structure, Phase Composition, and Properties of Ti3AlC2—Nano-Cu Powder Composites

Composites based on the MAX-phases are promising materials for wide range application. Composites MAX-phase–copper can be used in electrical engineering as wear-resistant and durable sliding contact materials. Such composites can be used as coatings on sliding contacts to improve local strength and wear-resistance without a significant increase in production costs. In this work, Ti3AlC2—nano-Cu composites with the ratio Ti3AlC2:Cu = 1:1 by weight or approximately 4:1 by volume were studied. The main task of the study is to obtain a dense structure, as well as to study the effect of the sintering temperature of the samples on their structure, phase composition, mechanical properties, and electrical conductivity. In addition, the sintered specimens were subjected to a hot isostatic pressing to possibly further increase the density. It was found that the best combination of strength, density, and electrical conductivity is achieved after sintering at 1050 °C. A further increase in the sintering temperature leads to an intensification of the MAX phase decomposition process, and at a lower sintering temperature, the copper matrix remains incompletely formed.