CO2 dissociation in a packed bed DBD reactor: effect of streamer discharge

Abstract Non-thermal plasma catalysis, as a special heterogeneous catalytic reaction, needs to consider both gas discharge and catalytic reaction. Packed bed dielectric barrier discharge (PB-DBD) is widely used in non-thermal plasma catalysis, but the exact control principle of gas discharge, especially streamer discharge, is not clear. In this study, therefore, the orderly arranged dielectric rods were packed in the discharge gap of PB-DBD, and the streamer discharge behaviors were controlled by adjusting their diameter(s), quantity(ies), location(s) and dielectric constant(s). Al 2 O 3 and ZrO 2 dielectric rods with dielectric constants of about 9 and 25 were used as packing material. Pure CO 2 was used as reaction gas and discharge gas. Discharge images showed that stable and controllable streamer discharges can be formed between the dielectric rod and ground electrode. The intensity, width and length of the streamer discharge can be significantly changed by optimizing the dielectric constant, diameter, packing number and position of the dielectric rod, thereby affecting the CO 2 conversion efficiency. Increasing dielectric constant and the distance between the dielectric rod and ground electrode can increase the intensity of streamer discharge, thus promoting the CO 2 conversion efficiency. Compared with an empty reactor, after packing 24 ZrO 2 dielectric rods with a diameter of 1 mm, the CO 2 conversion and energy efficiency increased from 9.58% to 20.1% and from 1.67% to 2.89%, respectively. In short, this research has important implications for plasma catalysis. This study not only reveals the synergistic characteristics between streamer discharge and CO 2 dissociation, but also provides an important idea for structural optimization of PB-DBD catalyst.