A Fully Integrated Low-Cost HF Multistandard RFID Reader SoC and Module for IoT Applications

The deployment and application of large-scale Internet of Things require a large number of 13.56-MHz radio-frequency identification (RFID) reader chips with lower cost. The existing RFID reader module needs to integrate multiple chips, such as microcontroller and high-frequency (HF) RFID reader IC on a single printed circuit board (PCB), which has the bottleneck of cost, power consumption, stability, and reliability. In order to adapt to the development trend of high integration, miniaturization, and low-power consumption of RFID reader, this article proposes a fully integrated low-cost RFID reader System-on-a-Chip (SoC), which integrates RF transceiver and analog circuit, baseband protocol processing, microcontroller, memory, and interface circuit into a single chip. The proposed reader IC supports communication protocols, such as ISO/IEC 14443 Type A and Type B, ISO/IEC 15693, and ISO/IEC 7816. The reader can communicate with contact and contactless IC cards. The modulation depth of the transmitter circuit ranges from 1% to 100%, and the maximum transmitting current is 126 mA. The receiver circuit is composed of I/Q clock generation, switched capacitor sampling circuit, variable gain amplifier (VGA) with filter, comparator, and pulse shaping circuit, which has good anti-noise performance. This 13.56-MHz RFID reader SoC is fabricated in a 180-nm CMOS process and is housed in a 64-pin QFP package. The total area is 8.75 mm ² , including 1.47 mm ² for analog and RF circuits.