Low‐Power Nonvolatile Charge Storage Memory Based on MoS2 and an Ultrathin Polymer Tunneling Dielectric

Abstract Low‐power, nonvolatile memory is an essential electronic component to store and process the unprecedented data flood arising from the oncoming Internet of Things era. Molybdenum disulfide (MoS 2 ) is a 2D material that is increasingly regarded as a promising semiconductor material in electronic device applications because of its unique physical characteristics. However, dielectric formation of an ultrathin low‐ k tunneling on the dangling bond‐free surface of MoS 2 is a challenging task. Here, MoS 2 ‐based low‐power nonvolatile charge storage memory devices are reported with a poly(1,3,5‐trimethyl‐1,3,5‐trivinyl cyclotrisiloxane) (pV3D3) tunneling dielectric layer formed via a solvent‐free initiated chemical vapor deposition (iCVD) process. The surface‐growing polymerization and low‐temperature nature of the iCVD process enable the conformal growing of low‐ k (≈2.2) pV3D3 insulating films on MoS 2 . The fabricated memory devices exhibit a tunable memory window with high on/off ratio (≈10 6 ), excellent retention times of 10 5 s with an extrapolated time of possibly years, and an excellent cycling endurance of more than 10 3 cycles, which are much higher than those reported previously for MoS 2 ‐based memory devices. By leveraging the inherent flexibility of both MoS 2 and polymer dielectric films, this research presents an important milestone in the development of low‐power flexible nonvolatile memory devices.