巴伦
CMOS芯片
电气工程
射频前端
多波段设备
前端和后端
物理
电压
无线电频率
电子工程
工程类
天线(收音机)
机械工程
作者
Adiseno,Hans Magnusson,Håkan Olsson
标识
DOI:10.1109/esscirc.2003.1257092
摘要
A balanced wide-band CMOS LNA with 18-26 dB gain, higher than +1.5 dBm IIP/sub 3/ and +20 dBm IIP/sub 2/, and less than 4.6 dB NF is achieved in the 900-MHz, 1.8-GHz and 2.4GHz-band by applying a dual-loop feedback. Measurement results show that the circuit works from DC to a frequency higher than 2.5 GHz (limited by the frequency range of the balun) with S/sub 11/ better than -15 dB. Simulation results show that the circuit has 15 dB gain and 5 dB NF at 5.2 GHz. The LNA consumes 20 mA from 1.8-V voltage-supply. As the output DC level is low, a stacked double balanced switching mixer on the output completes a front-end circuit for wireless receivers without consuming more current. The circuit is implemented in a 0.18/spl mu/m RF-CMOS technology with a die area of 0.4 /spl times/ 0.34 mm/sup 2/. This circuit is suitable for low-cost multiband multistandard front-end receivers.
科研通智能强力驱动
Strongly Powered by AbleSci AI