Measurement of tooth displacement

The periodontium is a biological structure that supports the tooth in the jaw and behave as a developmental, biological, and functional unit. Teeth may be considered to be 'suspended' in their tooth sockets which provides teeth the ability to move in response to an applied load. In terms of the protection the suspension effect of the periodontal ligament may offer dental restorations, movement in an axial direction is of interest. No device or system to measure this movement is readily available, thus a novel approach had to be developed to address the questions of this research. The device developed allowed images to be taken of the participants teeth before, during and after a participant bit down on the tooth and used to measure the displacement of the tooth in image processing software. Average maximum tooth displacement from all participants of 73.8 μm (sd = 22.5 μm) were recorded. Longer application time of bite force was associated with greater cumulative tooth displacement, for a given level of force, and female participants experienced approximately 2 μm more displacement per Newton than males. The device and methods utilised in this study has shown good potential as a measurement protocol for measurement of vertical tooth movements in vivo. The response to load the teeth in this study has shown, highlighted the visco-elastic properties of the periodontal ligament and the amount of movement recorded supports the protection that controlled tooth movement offers teeth.