Three-dimensional printing the navigation template for precise percutaneous renal puncture to treat pyonephrosis on a porcine model and a patient ：a case report

ObjectivePercutaneous nephrolithotomy (PCNL) is the main method for pyonephrosis or lithotripsy in urology. However, it often comes with high risk, as the inaccurate puncture inevitably causes bleeding, intra- and post-operative complications. So, a new inter-disciplinary approach is needed to perform the puncture more accurately.Methods3 signs made of lead were marked onto the skin of the posterior side of the waist of a domestic pig or a patient, which was scanned by computed tomography (CT). Based on the CT images, the computer design and the 3D printing, a navigation template made of the transparent resin material is constructed. They were attached onto the surgical area on pig or patient according to the signs. During the PCNL, with this template, the puncture position, angle and depth were optimized in order to precisely enter the targeted renal pelvis or calices.ResultsWith the 3D navigation templates, 18G puncture needles were used to enter the renal pelvis upon performing the PCNL on a porcine model and a patient. On the porcine model, the urine outflow was observed with minimal complication. Post-operative CT scans revealed that the needle was located in the renal pelvis. For the patient case, the puncture point was designed to target the calix with stone. No obvious bleeding and complication was found in renal puncture with template.ConclusionsThe navigation template was made with the combination of 3D printing, CT images and computer design. This template allows for accurate puncture of the renal pelvis or calix. Surgical improvement in kidney stones and pyonephrosis was observed in porcine model and patient case. In the future, prospective, trandomized, controlled clinical trials are needed to further confirm its advantage.