Role of C and B4C barrier layers in controlling diffusion propagation across the interface of Cr/Sc multilayers

The optical performance of low-bilayer-thickness metallic multilayers (ML) can be improved significantly by limiting the intermixing of consecutive layers at the interfaces. Barrier layers are supposed to exhibit a decisive role in controlling diffusion across the interfaces. The element-specific grazing incidence extended X-ray absorption fine structure technique using synchrotron radiation has been used in conjunction with grazing incidence X-ray reflectivity and diffuse X-ray scattering measurements to study the impact of the two most common barrier layers, viz., C and B4C, at the interfaces of Cr/Sc MLs. The diffusion propagation is reduced by both the barrier layers; however, it is found that the improvement is more significant with the B4C barrier layer. It is seen that C forms an intermixed layer with Sc and leads to carbide formation at the interface, which then acts as shielding and prevents further interdiffusion, while B4C hardly penetrates into Sc and stops the overlap between Sc and Cr directly by wetting the corresponding interface. Thus, the above measurements reveal crucial and precise information regarding the elemental diffusion kinetics at the interfaces of Cr/Sc MLs in a non-destructive way, which is very important for technological applications of these MLs as X-ray optical devices.