N/S Co-doped microporous carbon derived from PSSH-Melamine salt solution as cathode host for Lithium-Selenium batteries

Selenium cathode attracts great attention due to its high theoretical volumetric capacity and better electrical conductivity than sulfur cathode. Herein, N/S co-doped microporous carbon (NS-K-PC) is designed and prepared as Se host by a spray drying process of the poly(styrenesulfonic acid)-melamine salt solution followed by carbonization and activation process. The as-prepared NS-K-PC shows a very high micropore contribution of 94.8% in the total surface area, and a total N/S heteroatom doping level of 2.5 wt% in the carbon matrix. The NS-K-PC/Se cathode delivers a high reversible capacity of 499.2 mA h g-1 at 0.1C, superior rate capacity of 324 mA h g-1 at 8C, and great cycling stability with a capacity decay of 0.081% per cycle over 500 cycles at 1C. Additionally, a comparative study demonstrates that NS-K-PC/Se cathode with the carbonate-based electrolytes exhibit better cycling stability than those with ether-based electrolytes primarily resulted from a direct solid-solid conversion of Se to Li2Se bypassing the formation of soluble polyselenides.