Pb2+-imprinted thermosensitive antibacterial adsorbent derived from sodium alginate and PNIPAM for Pb2+ recovery

Two sodium alginate-based Pb2+-imprinted thermosensitive hydrogels (SPIT (without ɛ-PL) and SPPIT (with ɛ-PL)) were synthesized, with sodium alginate and ɛ-polylysine (ɛ-PL) as the matrix, N-isopropylacrylamide as the monomer. Characterization with differential scanning calorimeter, Fourier transform infrared spectroscopy, thermogravimetric analyzer, scanning electron microscopy, X-ray photoelectron spectroscopy, and Raman spectroscopy confirmed the aimed structure of the hydrogels. The adsorption capacity of SPIT and SPPIT for Pb2+ was 98.64 mg/g and 153.49 mg/g, respectively. Washing the Pb2+-loaded adsorbent with 10 °C deionized water, SPIT and SPPIT achieved a desorption efficiency of 94.59 % and 97.51 %, respectively. After 10 cycles of adsorption-desorption process, the adsorption capacity and desorption efficiency remained at about 80-88 % of the original ones, expressing excellent reusability. In a mixture containing eight metal ions (Pb2+, Cu2+, Mg2+, Ca2+, Cd2+, Na+, K+, Fe3+), the adsorption capacity of SPIT to Pb2+ was 92.49 mg/g, and that of SPPIT was 102.49 mg/g, much higher than that to the other ions (1.50-11.38 mg/g on SPIT, 9.48-27.45 mg/g on SPPIT), showing excellent adsorption selectivity. The introduction of ɛ-PL enhanced the adsorption capacity, antibacterial ability and stability of the hydrogel, ensuring better application potential in real wastewater.