Preparation of High-Performance Barium Titanate Composite Hydrogels by Deep Eutectic Solvent-Assisted Frontal Polymerization

This study aimed to develop composite hydrogels with exceptional piezoelectric properties and pressure sensitivity. To achieve the objective, this study created a deep eutectic solvent (DES) by mixing choline chloride (ChCl), acrylamide (AM), and acrylic acid (AA). Barium titanate nanoparticles (BTNPs) were incorporated as fillers into the deep eutectic solvents (DES) to synthesize the composite hydrogels using frontal polymerization (FP). The mechanical and piezoelectric properties of the resulting composite hydrogels were analyzed using Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). This study found that the BTNPs/P(AM-co-AA) composite hydrogels exhibited excellent mechanical and piezoelectric properties. This is attributed to the high dielectric constant of BTNPs and the electrode polarization phenomenon when subjected to pressure. With a BTNPs content of 0.6 wt%, the maximum compressive strength increased by 3.68 times compared with the hydrogel without added BTNPs. Moreover, increasing the BTNPs content to 0.6 wt% resulted in a 1.48 times increase in generated voltage under the same pressure, compared with the hydrogel with only 0.2 wt% BTNPs. This study provides a method for preparing composite hydrogels with outstanding piezoelectric properties and pressure sensitivity.