Design of High-Energy HMX-Based Composite ink and Research on Micro-Detonation Performance

Using hydroxypropyl methylcellulose (HPMC) aqueous solution and polyethyleneimine (PEI) ethanol solution as the composite bonding system, adding a certain amount of silicone defoamer and toluene diisocyanate (TDI), studied the micro-size charge forming effect of sub-micron Octogen (HMX)-based composite ink under the 3D direct writing printing process and the detonation performance and safety of sub-micron Octogen (HMX) under micro-size charges. The results show that the explosive ink with a solid content (quality score) of 90% has the best rheological properties, excellent printability, and the surface of the molded sample is smooth. The impact energy and friction of the molded sample are 7 J and 324 N, respectively, which are lower than those of the raw material HMX 100% and 237.5%, showing excellent mechanical sensitivity safety performance. In addition, XRD and FTIR show that the HMX crystal form in the composite ink remains β-type, the measured density of the molded sample is 1.432 g·cm−1, the detonation velocity is 6982 m·s−1, and the critical detonation size is 1 × 0.0771 mm, showing excellent microchannel detonation performance.