Preparation of Spray-Dried Wettable Powder Formulations of Bacillus thuringiensis-Based Biopesticides

Bacillus thuringiensis is the most widely used biopesticide among many methods available to control insects. To make a saleable product, B. thuringiensis must be substantially concentrated by removal of water and formulated to improve longevity, efficacy, and ease of transport of the product. B. thuringiensis subsp. aizawai culture broth as an active ingredient was mixed with various adjuvants and then spray dried. The optimum conditions for spray drying were found to be an outlet temperature of 60–85°C and an inlet temperature of 120–180°C. Various adjuvants had different effects on physical and biological properties of the dried product. Gelatinized tapioca starch and milk powder improved suspensibility but adversely affected wettability of the dried formulated product. Vegetable oil and Tween 20 enhanced wettability but resulted in poor suspensibility. Silica fume was used to enhance flowability because it reduced clumping and caking of the powder resulting from the addition of vegetable oil. Formulation containing 10% wt:wt B. thuringiensis, 10% wt:wt gelatinized tapioca starch, 10% wt:wt sucrose, 38% wt:wt tapioca starch, 20% wt:wt milk powder, 10% wt:wt silica fume, 2% wt:wt polyvinyl alcohol, 5% vol:vol Tween 20, 1% vol:vol refined rice bran oil, and 1% vol:vol antifoam solution was found to be optimum in terms of the physical and biological properties of the dried product. This formulation had 55% suspensibility, 24 s for wetting time, and 5.69 × 104 CFU/ml of LC50 value against Spodoptera exigua larvae.