镁
煅烧
扫描电子显微镜
粒径
氨
材料科学
形态学(生物学)
柠檬酸
无机化学
吸附
Crystal(编程语言)
氧化物
化学工程
核化学
催化作用
冶金
化学
有机化学
复合材料
工程类
程序设计语言
生物
遗传学
计算机科学
作者
Xue Li,Ying Zhang,Yan Zhang,Ze Jin,Peng Chang,Yunyi Liu
标识
DOI:10.1016/j.apt.2016.03.020
摘要
Magnesium oxide (MgO) with different morphology were prepared by calcining precursors (magnesium hydroxide MH). The precursors were synthesized from industry lightly calcined powder (MgO content of 80–93%) by ammonia circulation method. The structures of MH and MgO were characterized by scanning electron microscope and laser particle size analyzer. The crystal growth mechanism of MgO precursors were simulated by materials studio. The experimental results showed that the MgO had the same morphology with their precursors. The adsorption of SO42− can significantly increase the particle size of precursors, and its D50 reached 2.05 μm. After adsorping Cl−, the exposure proportion of planes (0 0 1) and (1 0 1) was reduced, and the morphology of MH more easily grow to be uniform bulk crystal. The activity of MgO (CAA) produced with MgCl2 was 15″85 by the citric acid method, which was higher than other MgO produced with Mg(NO3)2 and MgSO4.
科研通智能强力驱动
Strongly Powered by AbleSci AI