Photocatalytic degradation of bisphenol A by temperature-sensitive magnetic hydrogel with enhanced service life

Easy diffusion and low reusability limit the practicality of photocatalysts. In this study, a hollow sphere (HS) heterojunction was synthesized based on oxygen-doped carbon nitride (OCN) and layered double hydroxides (LDHs). A thermosensitive HS hydrogel (HS Gel) was prepared by mixing HS with N-isopropylacrylamide. Bisphenol A (BPA), being widely manufactured and used in commercial and domestical products and its high toxicity, was chosen as the target pollutant to demonstrate the photocatalytic ability and practicality of the HS Gel. HS Gel presented effective BPA degradation (95% degradation in 70 mins, 4.2 × 10-2 min-1 of kobs) at ambient temperature which is much better than kobs = 1.8 × 10-2 min-1 of OCN and kobs = 0.08 × 10-2 min-1 of LDH), and increased by two-fold the recycling service life (retention of >80% degradation efficiency after 13 usage cycles) compared to other carbon-based photocatalysts (retention of >80% degradation efficiency after 5-6 usage cycles). This is due to its multifunctional characteristics (magnetic property and thermal sensitivity). Under ambient temperature, the hydrophilic HS Gel swelled in the aqueous solution, which promoted the photocatalytic reaction between HS and BPA in the gel state. After the reaction, the HS Gel was subjected to shrinkage by high temperature heating to enhance the mechanical strength for recovery. The magnetic recovery was realized by the paramagnetic properties of layered double oxide to reduce environmental interference. Detailed studies of HS gel related to enhanced service life were conducted including structural changes, catalyst leaking and magnetic changing. A new kind of type Ӏ plus Z-scheme mechanism was also proposed based on the Kubelka-Munk equation, UV diffuse reflectance spectroscopy and Mott-Schotty technique.