The effect of ratios upon improving patient-based real-time quality control (PBRTQC) performance

Abstract Objectives Large biological variation hinders application of patient-based real-time quality control (PBRTQC). The effect of analyte ratios on the ability of PBRTQC to improve error detection was investigated. Methods Four single analyte-ratio pairs (alanine aminotransferase [ALT] vs. ALT to aspartate aminotransferase ratio [R ALT ]; creatinine [Cr] vs. Cr to cystatin C ratio [R Cr ]; lactate dehydrogenase [LDH] vs. LDH to hydroxybutyrate dehydrogenase ratio [R LDH ]; total bilirubin [TB] vs. TB to direct bilirubin ratio [R TB ]) were chosen for comparison. Various procedures, including four conventional algorithms (moving average [MA], moving median [MM], exponentially weighted moving average [EWMA] and moving standard deviation [MSD]) were assessed. A new algorithm that monitors the number of defect reports per analytical run (NDR) was also evaluated. Results When a single analyte and calculated ratio used the same PBRTQC parameters, fewer samples were needed to detect systematic errors (SE) by taking ratios (p<0.05). Application of ratios in MA, MM and EWMA significantly enhanced their ability to detect SE. The influence of ratio on random error (RE) detection depended upon the analytes and PBRTQC parameters, as consistent advantage was not demonstrated. The NDR method performed well when appropriate parameters were used, but was only effective for unilateral SE. Rearrangement of sample order led to a significant deterioration of conventional algorithms’ performance, while NDR remained almost unaffected. Conclusions For analytes with large variation and poor PBRTQC performance, using ratios as PBRTQC indexes may significantly improve performance and achieve better anti-interference ability, providing a new class of monitoring indicators for PBRTQC.