Epoxy–Date Palm Fiber Composites: Study on Manufacturing and Properties

Epoxy-date palm fiber (DPF) composites have been synthesized and characterized successfully with various reinforced ratios of DPF (i.e., 5, 10, 15, and 20 wt%), where the mixture of Epoxy–DPF is poured into different prepared silicone molds. The first type of silicon molds is prepared to produce the samples of the Epoxy–DPF composites to conduct mechanical tests (i.e., impact, creep, and tensile). When the ratio of DPF is increased in the Epoxy matrix, a significant improvement was observed in the results of the mechanical tests. The Epoxy–DPF composites with 15 wt% exhibit a high hardness of 38.4 in comparison with other composite specimens. Maximum impact strength, creep strain, and tensile strengths were recorded to be 0.13 J/mm2, 0.03112, and 23.4 N/mm2, respectively, using 20 wt% DPF.