轴流压缩机
流量(数学)
气体压缩机
流量控制(数据)
材料科学
环境科学
工程类
控制理论(社会学)
计算机科学
控制(管理)
机械
机械工程
物理
人工智能
电信
作者
Pedro de la Pezuela Pintó,G Srinivas
标识
DOI:10.1080/23311916.2024.2380804
摘要
This research article focuses on improving the efficiency of an axial flow compressor stage, enhancing the stall margin, and optimizing flow parameters. Utilizing the NACA 65 series rotor airfoil with 12 blades, the study employs numerical simulations using the K-epsilon turbulence model. The model is validated with experimental data under specific boundary conditions, including a total pressure at the intake and a static pressure at the exit, initially set at atmospheric pressure. The outlet static pressure is incrementally increased until the rotor reaches stall. At this stall point, the tip injection method, a well-known active flow control technique, is implemented to mitigate flow instabilities. Injectors are placed at the leading edge of the rotor blades, distributed circumferentially. The tip injection parameters include 0.3% of the total mass flow rate, a pitch angle of 30 degrees and yaw angles ranging from −15 to +15 degrees. The analysis shows a stall margin improvement (SMI) of 14.26% with the 0.3% total mass flow rate injection. A decrease in the yaw angle reduces blockage and promotes smoother flow over the rotor blade, with the optimal stall margin enhancement occurring at an adverse yaw angle of −15 degrees. This study demonstrates significant SMI in the axial flow compressor rotor using specific active flow control parameters, particularly highlighting the critical role of adverse yaw angles in the tip injection method in enhancing stall margin, contributing to overall efficiency and stability.
科研通智能强力驱动
Strongly Powered by AbleSci AI