碳纳米管
阳极
材料科学
无定形固体
化学工程
纳米技术
拉曼光谱
无定形碳
亚氧化物
电解质
纳米管
硅
电极
化学
光电子学
有机化学
工程类
物理化学
物理
光学
作者
Bingxin Shen,Ning Fu,Yu‐Wen Chen,Wei Shao,Yurong Yan,Jia Huang,Zhenglong Yang
标识
DOI:10.1016/j.cej.2022.140820
摘要
Micron silicon suboxide (m-SiOx) with low-cost and advantageous capacity has been proposed as a prospective candidate for lithium-ion battery anodes, yet huge volumetric fluctuation and poor inherent conductivity should be addressed urgently. Herein, encapsulation of m-SiOx particles into amorphous B, N co-doped carbon nanotube network (SSBCN) via metal cation-assisted carbonization is shown. Rational preparation process enables in-situ synthesis of 3D porous carbon nanotubes network around m-SiOx, guaranteeing slight volume variation during cycling, effective electrical contact, fast electron and Li-ion transfer and speedy electrolyte penetration. In-situ Raman spectra confirm the additional utilization rate of m-SiOx. Heteroatomic active sites (Sn, N, B) further enhance lithium storage capacity. As anodes in half batteries, the SSBCN exhibits ultrahigh reversible capacities of 2072.8 mAh/g at 0.1 A/g, excellent rate performance of 501.8 mAh/g at 10 A/g and prominent long-term cycle stability of 400 and 1000 cycles at 1 and 5 A/g, respectively. Moreover, SSBCN//LiFePO4 (LFP) full batteries also display remarkable cycle durability with a 92.72% capacity retention after 600 cycles at 1C. This work outperforms most of the recently reported SiOx-based anodes and renders a new opportunity of m-SiOx in high-performance LIBs.
科研通智能强力驱动
Strongly Powered by AbleSci AI