烟气
吸附
化学工程
化学
材料科学
环境科学
物理化学
有机化学
工程类
作者
Chunling Xin,S Hou,Lei Yu,Xiaojing Zhou,Yingjuan Fu,Xiaorong Yang,Wei Sun,Fan-Ming Yang,Xia Wang,Lili Liu
出处
期刊:Coatings
[MDPI AG]
日期:2024-03-25
卷期号:14 (4): 383-383
标识
DOI:10.3390/coatings14040383
摘要
Yellow nanorod Mg-MOF-74 was obtained through a solvothermal synthesis method. The XRD, N2 adsorption–desorption isotherms, SEM, and TGA results suggest that the particle size of Mg-MOF-74 reaches 400 nm after the introduction of sodium acetate in the precursor of Mg-MOF-74. Furthermore, the morphology of Mg-MOF-74 changed from cauliflower- to rod-shaped particles. At the same time, the BET specific surface area and pore volume of Mg-MOF-74 also increased a lot. Then, the CO2 dynamic adsorption capacity of Mg-MOF-74 was measured with a self-made fixed bed at 30 °C and a 0.1 bar CO2 partial pressure. The results show that the CO2 adsorption capacity of Mg-MOF-74-N2 reaches 3.67 mmol/g, and its CO2 adsorption capacity remains unchanged after 10 CO2 adsorption–desorption cycles.
科研通智能强力驱动
Strongly Powered by AbleSci AI