Gurson model parameters for ductile fracture simulation in ASTM A992 steels

ABSTRACT This study is concerned with the modelling the ductile fracture in ASTM A992 steels using the Gurson‐Tvergaard‐Needleman (GTN) model for high stress triaxiality regime. The GTN model for ASTM A992 structural steels is calibrated from the experiments performed on axisymmetrically notched tensile specimens. The experiments are designed to obtain a range of stress triaxiality and different fracture initiation locations. The non‐uniqueness in the constitutive parameters of the GTN model is illustrated in this study. The choice of a unique set of GTN constitutive parameters is made by choosing the nucleation strain ( ɛ N ) as a material constant. The process of estimating this material specific nucleation strain is provided. All the other GTN model parameters corresponding to the material specific nucleation strain ( ɛ N ) are evaluated to best fit the experimental results. The calibrated GTN model is shown to predict the load displacement behaviour, ductility and fracture initiation locations in the notched specimens. The calibrated GTN parameters are used to successfully predict the ductility of structural components: (a) bars with a hole; (b) plate with reduced section and (c) plate with holes; that are typically found in structural engineering applications.