成核
材料科学
阳极
过电位
剥离(纤维)
电镀(地质)
锌
锂(药物)
重量分析
金属
无机化学
化学工程
电化学
电极
金属锂
枝晶(数学)
冶金
复合材料
化学
物理化学
内分泌学
有机化学
几何学
工程类
地质学
医学
数学
地球物理学
作者
Jianan Gu,Qi Zhu,Yongzheng Shi,Hao Chen,Di Zhang,Zhiguo Du,Shubin Yang
出处
期刊:ACS Nano
[American Chemical Society]
日期:2020-01-08
卷期号:14 (1): 891-898
被引量:182
标识
DOI:10.1021/acsnano.9b08141
摘要
Lithium (Li) metal has been considered as one of the most prospective anodes for Li-based batteries owing to its high theoretical gravimetric capacity (3860 mAh g-1) and low potential (-3.04 V vs standard hydrogen electrode (SHE)). Unfortunately, there commonly exist uncontrollable dendrites in lithium anodes during the repeated plating-stripping processes, causing short cycle life and even short circuiting of lithium batteries. Here, single zinc atoms immobilized on MXene (Ti3C2Clx) layers (Zn-MXene) were produced to efficiently induce Li nucleation and growth. At the initial plating stage, lithium tended to nucleate homogeneously on the surface of Zn-MXene layers due to the large presence of Zn atoms and then grow vertically along the nucleated sites owing to a strong lightning rod effect at the edges, affording bowl-like lithium without lithium dendrites. Thus, a low overpotential of 11.3 ± 0.1 mV, long cyclic life (1200 h), and deep stripping-plating levels up to 40 mAh cm-2 are obtained by using Zn-MXene films as lithium anodes.
科研通智能强力驱动
Strongly Powered by AbleSci AI