润湿
化学工程
表面张力
吸附
集聚经济
傅里叶变换红外光谱
粘度
结块
黄原胶
接触角
扫描电子显微镜
煤
材料科学
化学
复合材料
有机化学
流变学
工程类
物理
量子力学
作者
Bo Zhao,Shugang Li,Haifei Lin,Yueying Cheng,Xiangguo Kong,Yang Ding
标识
DOI:10.1016/j.powtec.2021.10.026
摘要
To investigate the effect of surfactants in compound solution on the wetting-agglomeration properties of the bituminous coal dust, this paper selected anionic surfactants SDS, SDBS and non-ionic surfactants APG0810 and PPG400 for compounding with agglomerated solutions 0.05 wt% XTG (xanthan gum). The sink test, surface tension test, viscosity test, fourier transform infrared spectroscopy(FTIR) and scanning electron microscope(SEM) were used to investigate the wettability and agglomeration of the four compound solutions and analyze the agglomeration wetting mechanism. The results show that SDBS has the most obvious improvement in the wettability of compound solution. The surface tension of SDBS + 0.05 wt% XTG is 28.98 mN/m after CMC value and sinking rate will reach 14.29 mg/s with 0.6 wt% SDBS in compound solution; Furthermore, FTIR results showed that surface hydroxyl content of bituminous coal dust treated by 0.2 wt% SDBS + 0.05 wt% XTG solutions has increased 26.3% than that treated by 0.05 wt% XTG, which promoted the adsorption of xanthan gum molecules on the coal surface. The presence of surfactants decreases the viscosity and surface tension of compound solution, and xanthan gum–surfactants interaction will promote bituminous coal dust agglomeration effect. This agglomeration mechanism is mainly reflected in the distribution mechanism and bituminous coal dust can form to large agglomerates under this action.
科研通智能强力驱动
Strongly Powered by AbleSci AI