光纤
同步辐射
材料科学
拉曼光谱
功率(物理)
光学
热的
温度测量
光纤传感器
热辐射
辐射
纤维
光电子学
物理
复合材料
量子力学
气象学
热力学
作者
Manoj Kumar Saxena,Rakesh Sharma,S. Barath Kumar,J. Kishore,R.K. Nathwani,A.M. Gupta,Ajay Kumar,Ajay Kumar,V.K. Bhatnagar,Om Prakash,S. K. Dixit
标识
DOI:10.1016/j.yofte.2022.103020
摘要
• ROFDTS deployed successfully in Indus-2 synchrotron radiation source. • ROFDTS measures the temperature profile of a 160 m long power supply cable (current 760 A, DC) of dipole magnets. • ROFDTS can also detect the progress of unforeseen fire events anywhere in the cable. • The sensing fiber of ROFDTS could survive in the harsh environment of Indus-2. • Mapping of various dipoles is provided on the temperature profile curve. The paper presents the work on development and application of Raman optical fiber distributed temperature sensor (ROFDTS). ROFDTS has been used for monitoring the temperature profile and detecting the progress of unforeseen fire events anywhere in a 160 m long power supply cable (current 760 A, DC) of dipole magnets in the Indus-2 synchrotron radiation source (SRS). Indus-2 is a national facility and is being operated in round the clock mode. The sensing fiber could survive in the harsh environment of Indus-2 SRS that consists of bremsstrahlung radiation of 6.7 Rad/h, high magnetic field of 1.5 T and radio frequency (RF) field of 1.27 MV at 505.812 MHz. The fire detecting capability of ROFDTS was first tested on the mock test setup in the laboratory by artificially creating the four hot zones. Each hot zone has the width of 1.0 m in the sensing fiber at the spatial locations of 26 m, 48 m, 70 m and 92 m respectively. An audio-visual alarm was generated when the temperature of the hot zones exceeded the set temperature limit of 50 °C within 30 s of the start of the fire. Finally, ROFDTS system was deployed to measure the temperature profile of power supply cable during ‘no operation’, ‘injection’ of the electron beam current (109 mA with the energy of electrons @ 550 MeV) and at ‘normal operation’ of the electron beam current (145 mA with the energy of electrons @ 2.5 GeV) in Indus-2 SRS. The peak temperature of power cable reached from 26 °C to 44 °C from ‘no operation’ to during the ‘normal operation’ condition of the Indus-2 SRS.
科研通智能强力驱动
Strongly Powered by AbleSci AI