热解
热重分析
傅里叶变换红外光谱
化学
动力学
反应级数
化学工程
有机化学
材料科学
核化学
反应速率常数
物理
量子力学
工程类
作者
Long Tian,Tingting Liu,Jinzhong Yang,Haoyue Yang,Zewei Liu,Youcai Zhao,Qifei Huang,Zechun Huang
标识
DOI:10.1016/j.jenvman.2022.116962
摘要
The present study experimentally quantified the pyrolysis behaviors of waste solvent-based automotive paint sludge (OAPS) and water-based automotive paint sludge (WAPS) at four different heating rates using thermogravimetric-Fourier transform infrared (TG-FTIR) spectrometry and pyrolysis-gas chromatography-mass (Py-GC/MS) spectrometry analyses. Flynn-Wall-Ozawa (FWO) and Kissinger-Akahira-Sunose (KAS) methods combined with the master-plots method were employed to investigate the pyrolysis kinetics and reaction mechanisms of waste automotive paint sludge. Three reaction stages and three reaction peaks in stage 2 were distinguished for both OAPS and WAPS degradation. The average activation energy (Ea) estimates for OAPS (FWO: 179.09 kJ/mol; KAS: 168.28 kJ/mol) were slightly higher than WAPS (FWO: 175.90 kJ/mol; KAS: 164.80 kJ/mol) according to FWO and KAS methods. The main pyrolysis reaction mechanisms of both OAPS and WAPS closely matched with the order-based model corresponding to 3rd and 2nd order random nucleation on an individual particle. The evolved gas species of CH4, CO2, phenols, NH3, H2O, and CO from OAPS and WAPS pyrolysis were identified by TG-FTIR. According to Py-GC/MS, hydrocarbons (47.2%) and O-components (42.7%) were relatively large after OAPS and WAPS pyrolysis, respectively. Melamine was the most abundant N-component product after pyrolysis of OAPS (5.8%) and WAPS (4.8%).
科研通智能强力驱动
Strongly Powered by AbleSci AI