Study on fracture characteristics and fracture mechanism of fully recycled aggregate concrete using AE and DIC techniques

Fracture behaviors of manufactured sand-recycled coarse aggregate concrete (MSRCAC), recycled fine aggregate concrete (RFAC), and fully recycled aggregate concrete (FRAC) were investigated by performing three-point bending tests on single-edge notched beams using acoustic emission (AE) and digital image correlation (DIC) techniques. The effects of recycled fine aggregate (RFA), recycled coarse aggregate (RCA), and their interaction on fracture parameters, AE characteristics and fracture process zone (FPZ) of concrete were comparatively analyzed. The results indicated that it was mainly transgranular failure and intergranular failure for RFAC, while transgranular failure for MSRCAC and FRAC. The RFA and RCA reduced the initial fracture toughness, unstable fracture toughness and fracture energy of concrete, and their interaction resulted in poor fracture properties of FRAC. In addition, the RFA and RCA significantly increased the AE activities, the proportion of tensile cracks, and the high-frequency amplitude and peak frequency of concrete. The toughening effect of FPZ was weakened by the RFA and RCA, resulting in an obvious increase in FPZ length and damage propagation of FRAC. Meanwhile, the width of FPZ was reduced, the maximum FPZ width of concrete with different combinations of recycled aggregates was approximately 1.8–3.1 times the maximum aggregate size, which could be explained as the RFA and RCA reduced the aggregate interlocking effect of concrete, while the RCA had a greater effect on the damage mechanism and FPZ of concrete than the RFA.