Boosting the UV–vis–NIR Photodetection Performance of MoS2 through the Cavity Enhancement Effect and Bulk Heterojunction Strategy

Navigating more effective methods to enhance the photon utilization of photodetectors poses a significant challenge. This study initially investigates the impact of morphological alterations in 2H-MoS2 on photodetector (PD) performance. The results reveal that compared to layered MoS2 (MoS2 NLs), MoS2 nanotubes (MoS2 NTs) impart a cavity enhancement effect through multiple light reflections. This structural feature significantly enhances the photodetection performance of the MoS2-based PDs. We further employ the heterojunction strategy to construct Y-TiOPc NPs:MoS2 NTs, utilizing Y-TiOPc NPs (Y-type titanylphthalocyanine) as the vis–NIR photosensitizer and MoS2 NTs as the photon absorption enhancer. This approach not only addresses the weak absorption of MoS2 NTs in the near-infrared region but also enhances carrier generation, separation, and transport efficiency. Additionally, the band bending phenomenon induced by trapped-electrons at the interface between ITO and the photoactive layer significantly enhances the hole tunneling injection capability from the external circuit. By leveraging the synergistic effects of the aforementioned strategies, the PD based on Y-TiOPc NPs:MoS2 NTs (Y:MT-PD) exhibits superior photodetection performance in the wavelength range of 365–940 nm compared to MoS2 NLs-based PD and MoS2 NTs-based PD. Particularly noteworthy are the peak values of key metrics for Y:MT-PD, such as EQE, R, and D* that are 4947.6%, 20588 mA/W, and 1.94 × 1012 Jones, respectively. The multiperiod time-resolved photocurrent response curves of Y:MT-PD also surpass those of the other two PDs, displaying rapid, stable, and reproducible responses across all wavelengths. This study provides valuable insights for the further development of photoactive materials with a high photon utilization efficiency.