材料科学
活化能
解吸
球磨机
氢气储存
分解
复合数
氢
动力学
催化作用
化学工程
热分解
复合材料
物理化学
化学
有机化学
吸附
合金
工程类
物理
量子力学
作者
M. Ismail,Muhammad Syarifuddin Yahya,N.A. Sazelee,N.A. Ali,F.A. Halim Yap,N.S. Mustafa
标识
DOI:10.1016/j.jma.2020.04.002
摘要
The catalytic effect of K2SiF6 on MgH2 was first timely studied. The MgH2 + 5 wt.% K2SiF6 was prepared via the ball milling technique. The catalyst had lessened the initial decomposition temperature by 134 °C and 48 °C as compared to both pristine and milled MgH2 samples, respectively. In 2 minutes, 4.5 wt.% of hydrogen was absorbed (250 °C) by the doped composite, which was 0.8 wt.% higher than the milled MgH2. Meanwhile, for the desorption kinetics (320 °C, 1 atm), the amount of desorbed hydrogen was increased by 2.4 wt.% and 2.3 wt.% for the first 10 and 20 minutes. Besides, contracting volume and Johnson-Mehl-Avrami models were used to analyse the kinetics sorptions. The decomposition activation energy calculated based on Kissinger equation was 114 kJ/mol. As for the active species, Mg2Si, MgF2 and KH were formed during the heating process. These active species are speculated to be responsible for the improvement of the hydrogenation properties of the composite.
科研通智能强力驱动
Strongly Powered by AbleSci AI