A method for the efficient removal of Pb(II) by D001 resin in a rotating packed bed

The treatment of Pb(II) is a challenging problem. In this study, a new approach for removal of Pb(II) using D001 resin in a rotating packed bed (RPB) is proposed, and the adsorption behaviors and mechanisms are investigated. The results reveal that under optimal conditions (initial Pb(II) concentration c0 = 100 mg L−1, high-gravity factor β = 36.33, liquid flow rate QL = 60 L h−1, initial solution pH = 5.0, and temperature T = 303 K), the removal rate of Pb(II) in RPB is 95.54 % at 120 min, which is 12.18 % and 9.81 % higher than that in thermostatic shaker (TS) and stirred tank reactor (STR). The adsorption of Pb(II) by D001 resin can be well described by the Langmuir adsorption isotherm and the adsorption heat is 13.24 kJ mol−1, and it is a typical monomolecular layer adsorption. It is also found that the adsorption mechanism of Pb(II) by D001 resin in RPB follows the pseudo-first-order kinetics, and the rate constant k1 is 1.72 and 1.64 times that in TS and STR. The R-SO3Na is the dominant group and Na+ undergoes ion exchange with Pb (II) on the surface of D001 resin. This study provides a new method for the treatment of Pb(II).