Behavior of high-burnup BWR UO2 fuel with additives under reactivity-initiated accident conditions

Fuels with additives are expected to provide enhanced fuel performance in fission gas retention owing to their large grain size, which elongates fission gas migration path. To investigate behavior of the fuels during a reactivity-initiated accident (RIA), RIA-simulated experiments OS-1 and LS-4 were performed on ADOPT (chromia- and alumina-doped UO2) fuel of 64 GWd/t and chromia-doped UO2 fuel of 48 GWd/t, respectively. The OS-1 rod failed at a fuel enthalpy increase of 160 J/g due to pellet–cladding mechanical interaction failure, which was the lowest failure limit among the test results ever obtained at the NSRR on high-burnup fuels from 40 to 65 GWd/tU. Comparison of the hydride morphologies in the cladding metallic layer between the rods subjected to the past NSRR tests suggests the contribution of radially oriented hydrides during base irradiation to the low failure limit. The LS-4 rod survived for a peak fuel enthalpy increase of 549 J/g, which resulted in cladding deformation of ~2.4% in the residual hoop strain and FGR of 1.4–6.1%. Whereas the low fission gas release exhibits the effect of additives, the cladding deformation is within the range explained by the deformation mechanism essentially identical to those recognized for high-burnup undoped fuels.