Resonant-mode engineering for additive reflective structural colors with high brightness and high color purity

Abstract We present quad-layered reflective structural color filters generating vivid additive primary colors by controlling a mode number in a Fabry–Perot (FP) cavity and an anti-reflective (AR) coating layer, thus accomplishing high spectral contrast which is highly demanded in creating sharp colors. The reflection brightness of fabricated structural color filters is over 78% and a color gamut is comparable to the standard color gamut (sRGB). Higher-order resonant modes are exploited yielding a narrow passband with strong suppression of the reflection at shorter and longer wavelength ranges for a green color, while red and blue colors are produced by employing fundamental resonant modes. Besides, the structural color filters maintain both high brightness and high color purity at oblique incidence angles up to 40° due to a small angle of refraction by a cavity medium with high refractive index. Moreover, a large-scale fabrication is enabled owing to the simplicity of a device structure, where thin film deposition is used. The scheme presented in this work may open the door to a number of applications, such as reflective displays, imaging devices, colored photovoltaics, and decorations.