等轴晶
材料科学
微观结构
焊接
极限抗拉强度
光学显微镜
冶金
惰性气体
接头(建筑物)
压痕硬度
扫描电子显微镜
激光功率缩放
断裂(地质)
复合材料
碳钢
激光器
腐蚀
光学
建筑工程
工程类
物理
出处
期刊:Indian Journal of Engineering and Materials Sciences
日期:2020-01-01
卷期号:27 (02)
标识
DOI:10.56042/ijems.v27i2.45968
摘要
In this study, laser remelting has been performed on the Metal Inert Gas welded (MIG) low carbon mild steel at varying laser power inputs (400 W & 600 W). To investigate the influence of laser remelting on the joint properties, optical microscope observation, scanning electron microscope observation, microhardness measurement and mechanical tests have been conducted. The experimental results revealed that the surface appearance of the laser remelted MIG welded joints have been found to be smooth and the microstructure of its fusion zone possesses fine equiaxed dendrites as compared with that of the MIG welded joints. In addition, the fracture surface of the laser melting carried at low power (400 W) on the MIG welded joint has exhibited a ductile fracture whereas, the MIG welded joint has undergone brittle fracture. The laser remelting carried out at 400 W on the MIG welded joint has resulted in 12% increase in both the ultimate tensile strength and percentage of elongation as compared to that of the MIG welded joint and this has been ascribed to the presence of equiaxed grains in the microstructure.
科研通智能强力驱动
Strongly Powered by AbleSci AI