重复性
分辨率(逻辑)
算法
灵敏度(控制系统)
物理
计算机科学
工程类
数学
电子工程
人工智能
统计
作者
Zhenying Cheng,Xin Liu,Ying-Jun Lei,Qiaosheng Pan,Ruijun Li
出处
期刊:IEEE Sensors Journal
[Institute of Electrical and Electronics Engineers]
日期:2022-05-18
卷期号:22 (13): 12738-12745
被引量:5
标识
DOI:10.1109/jsen.2022.3176447
摘要
Unknown micro-contact forces may affect operation accuracy in micro-operation technology and high-precision contact measurement. Existing micro force sensors are unable to meet the demand for high resolution, large range, and low cost. Therefore, a more economical solution for high-precision force measurement is needed. A high-precision optical force sensor (OPFS) with a simple sensing principle is proposed in this study. The OPFS is mainly composed of a laser diode, a force-sensitive structure, and a four-quadrant photodetector (QPD). When force is applied to the measuring platform, the force-sensitive structure produces the corresponding elastic deformation, which is sensed by the QPD. The multi-range and customized resolution of the OPFS can be achieved by adjusting the stiffness of the force-sensitive structure. The design and optimization of the OPFS are completed via theoretical modeling and simulation analysis. The performance of the OPFS is examined experimentally. The OPFS is found to have a sensitivity of 0.27 mV/ $\mu \text{N}$ , a measuring range of 0–2.71 mN, and a resolution of $32\mu \text{N}$ . The measurement uncertainty of the OPFS due to nonlinearity, resolution, repeatability, and drift is $82\mu \text{N}$ . The effectiveness of the OPFS in the measurement of micro-forces is verified. Finally, the OPFS is used to measure the contact force of a micro/nano contact probe. The results show that OPFS can be used for force calibration in micro/nano contact measurement instruments.
科研通智能强力驱动
Strongly Powered by AbleSci AI