Imidazoline As a Volatile Corrosion Inhibitor for Mitigation of Top- and Bottom-of-the-Line CO2 Corrosion in Carbon Steel Pipelines

A fatty acid imidazoline-based inhibitor was synthesized via a facile solvent-free synthesis method between tall oil fatty acid (TOFA) and diethylenetriamine (DETA) under atmospheric conditions with a short reaction time. The as-synthesized imidazoline (S-Imd) acted as an effective inhibitor for reducing or preventing corrosion of carbon steel pipelines at both bottom of the line (BOL) and top of the line (TOL) positions under simulated conditions of a gas pipeline in a CO2-saturated environment. The inhibition efficacy was examined by both weight loss and electrochemical measurements, such as the electrochemical impedance spectrum (EIS), potentiodynamic polarization (PDP), and linear polarization resistance (LPR). The results revealed that the S-Imd, 2-(8-heptadecenyl)-2-imidazoline-1-ethanamin, at 300 ppm exhibited a superior inhibition efficiency of up to 91.6 and 89.9% for BOL and TOL corrosion tests, respectively. The surface morphology of the carbon steel test specimens was also examined using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDAX), and contact angle analysis. It was found that the as-synthesized S-Imd acted as a mixed-type inhibitor that exhibited a decreased surface roughness and oxide layer on carbon steel surfaces. However, the water contact angle was found to increase, implying enhanced hydrophobicity of the surface. Adsorption of the imidazoline molecules on carbon steel surfaces followed the Langmuir adsorption isotherm. The present work provides very promising results in the synthesis and utilization of the studied imidazoline as a volatile corrosion inhibitor (VCI), especially for carbon steel pipelines in petroleum industries.