材料科学
波导管
包层(金属加工)
兴奋剂
激发态
光电子学
发光二极管
光放大器
激光器
光学
原子物理学
物理
冶金
作者
Zhuliang Lin,Yi Man,Ziyue Lv,Baoping Zhang,Hui Xu,Daquan Yu,Xingchen Yang,Yan He,Xiaowu Shi,Leiying Ying,Dan Zhang
标识
DOI:10.1002/adma.202209239
摘要
Chelate phosphine oxide ligand (9,9-dimethyl-9H-xanthene-4,5-diyl) bis (diphenylphosphineoxide) (XPO) is prepared as a neutral ligand to synthesize complex Nd (TTA)3 (XPO) (TTA = 2-thenoyltrifluoroacetone). An appropriate energy gap between the XPO and TTA ligands, which can support two additional energy transfer routines from the first excited triplet state (T1) energy level of the XPO to that of the TTA, improves energy transfer in the Nd complex. Based on intramolecular energy transfer mechanism, optical gains at 1.06 and 1.31 µm are demonstrated in Nd (TTA)3 (XPO)-doped polymer waveguides with the excitation of low-power light-emitting diodes (LEDs) instead of semiconductor lasers as pump sources. Using the vertical top-pumping mode of a 365 nm LED, relative gains of 22.5 and 8.4 dB cm−1 are obtained at 1.06 and 1.31 µm, respectively, in a 0.2 cm long embedded waveguide with a cross-section of 8 × 5 µm2. The active core layer is Nd (TTA)3 (XPO)-doped SU-8 polymer. Moreover, relative gains are achieved in evanescent-field waveguide with a cross-section of 6 × 4 µm2. The 21.0 and 5.6 dB cm−1 relative gains are achieved at 1.06 and 1.31 µm, respectively, with a net gain of 13.8 ± 0.3 dB cm−1 obtained at 1.06 µm in a 0.9 cm long SU-8 waveguide with Nd (TTA)3 (XPO)-doped polymethylmethacrylate as upper cladding.
科研通智能强力驱动
Strongly Powered by AbleSci AI