A novel subcritical water synergistic co-treatment of brominated epoxy resin and copper-based spent catalysts: debromination, phenol production, and copper recovery

In this study, a high-efficiency co-treatment strategy for brominated epoxy resin (BER) and copper-based spent catalyst (CBSC) was developed by using subcritical water (SubCW) process. Multivalent species of copper released from CBSC could accelerate the electron transfer of the SubCW system and efficiently catalyze radical reactions to promote the debromination and decomposition of BER, and had an effect on the capture and binding of bromine species. Meanwhile, the formation of HBr by the BER debromination resulted in a decrease in the system pH and markedly enhanced the leaching/recovery of Cu from CBSC. The optimal conditions of the SubCW co-treatment process were as follows: reaction temperature of 350 °C, solid-to-liquid ratio of 1:30 g/mL, BER-to-CBSC mass ratio of 10:1 g/g, and reaction time of 60 min. Under the optimal conditions, 97.12 % of the Br could be removed from BER by the SubCW co-treatment process and a high-purity phenol (64.09 %) could be obtained in the oil phase product, and 86.44 % of Cu in the CBSC could be leached and recovered. The introduction of CBSC significantly changed the decomposition path of BER. Compared to the SubCW process without CBSC, bromine-free oils products could be obtained by the co-treatment process of BER and CBSC at low-temperature. This study provided a novel understanding of resource conversion mechanism of BER and CBSC in subcritical water medium via the synergistic effect between the two different waste streams to improve treatment efficiency and synchronously recover high-value products.