Robustly Enhanced Seebeck Coefficient in the MXene/Organics/TiS2 Misfit Structure for Flexible Thermoelectrics

The flexible thermoelectric (TE) generator has emerged as a superior alternative to traditional batteries for powering wearable electronic devices, as it can efficiently convert skin heat into electricity without any safety concerns. MXene, a highly researched two-dimensional material, is known for its exceptional flexibility, hydrophilicity, metallic conductivity, and processability, among other properties, making it a versatile material for a wide range of applications, including supercapacitors, electromagnetic shielding, and sensors. However, the low intrinsic Seebeck coefficient of MXene due to its metallic conducting nature poses a significant challenge to its TE application. Therefore, improving the Seebeck coefficient remains a primary concern. In this regard, a flexible MXene/organics/TiS2 misfit film was synthesized in this work through organic intercalation, exfoliation, and re-assembly techniques. The absolute value of Seebeck coefficient of the misfit film was significantly enhanced to 44.8 μV K–1, which is five times higher than that of the original MXene film. This enhancement is attributed primarily to the weighted effect of the Seebeck coefficient and possibly to energy-filtering effects at the heterogeneous interfaces. Additionally, the power factor of the misfit film was considerably improved to 77.2 μW m–1 K–2, which is 18 times higher than that of the original MXene film. The maximum output power of the TE device constructed of the misfit film was 95 nW at a temperature difference of 40 K, resulting in a power density of 1.18 W m–2, demonstrating the significant potential of this technology for driving low-energy consumption wearable electronics.