Hydrophobic-oleophilic gamma-irradiated modified cellulose nanocrystal/gelatin aerogel for oil absorption

This study highlights the potential use of cellulose nanocrystals (CNCs) from kenaf fiber as a dominant phase for aerogel application. CNCs were modified with methyltrimethoxysilane (MTMS) using the sol-gel method and bound with gamma-irradiated cross-linked gelatin. The properties of the aerogel were studied using Fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), and water contact angle (WCA). Compression and oil absorption tests were performed to study the aerogels' mechanical and oil absorption properties. A decrease in the OH peak and improved hydrophobicity of CNCs in CNC-MTMS suggested the successful grafting of MTMS onto CNCs, as shown in the FTIR and WCA analyses. Several absorption peaks in the FTIR spectrum shifted, disappeared, or reduced, implying a formation of crosslink between gelatin molecules and hydrogen bonding between CNC and gelatin. FESEM micrographs showed well-organized pores in the gamma-irradiated aerogel, which contribute to increased compressive strength. The oil absorption test indicated that gamma-irradiated CNC-MTMS/gelatin could be a good oil absorbent. Furthermore, this aerogel showed good reusability, where only 4 % of crude oil absorption reduction occurred by the eighth cycle. The combined properties of these aerogel materials can provide good mechanical and oil absorption performance.