Dynamic monitoring feedback iteration control for damping-adjustable semi-active suspension systems

In order to further improve vehicle ride performance, a dynamic monitoring feedback iteration control algorithm is proposed by combining the features of a variable-damping semi-active suspension system and applying them to the system. A seven-degree-of-freedom finished vehicle simulation model is built based on MATLAB/Simulink. The root-mean-square values of the acceleration of the sprung mass, the dynamic travel of the suspension and the dynamic tire load are taken as evaluation indicators of vehicle ride performance. An analytic hierarchy process (AHP) is used to determine the weighting coefficients of the evaluation indicators, and a genetic algorithm is utilized to determine the optimal damping of the suspension under various typical working conditions. Suspension damping is controlled with a dynamic monitoring feedback iteration algorithm. The correction coefficients of the control algorithm are determined according to the deviation between the obtained damping and the optimized damping so that the control parameters will agree with the optimal result under typical working conditions, and the control effect under other working conditions is verified. The simulation results indicate that the proposed dynamic monitoring feedback iteration control algorithm can effectively reduce the root-mean-square value of the acceleration of the sprung mass by 10.56% and the root-mean-square value of the acceleration of the dynamic travel of the suspension by 11.98% under mixed working conditions, thus improving vehicle ride performance. The study in this paper provides a new attempt for damping control of semi-active suspension and lays a theoretical foundation for its application in engineering.