Nano and traditional copper and zinc antifouling coatings: metal release and impact on marine sessile invertebrate communities

Artificial surfaces in coastal waters and offshore oceans, including boat hulls, docks, and offshore structures, are invariably colonized, or fouled, by a host of sessile species known collectively as fouling communities. Fouling has great economic impacts on shipping and other marine industries and plays an important role in the spread of marine invasive species across the globe. The main strategy to prevent fouling of artificial surfaces is application of antifouling coatings containing varying concentrations and mixtures of biocides. Presently, copper and zinc are popular antifouling biocides, and the latter is gaining in usage due to the known toxic characteristics of copper in the marine environment and consequent regulation and consumer opinion. Nanomaterials, including Cu and ZnO nanoparticles, have been explored as a way to efficiently deliver biocides from coating matrices. Here, we examine the efficacy and biocide release characteristics of several copper- and zinc-based antifouling coatings, including formulations containing traditional micron-sized Cu and ZnO particles and two containing copper and ZnO nanoparticles, respectively. Most of the antifouling coatings tested significantly reduced the abundance and biodiversity of the fouling community in the three study locations across California. Invasive species were suppressed by most coatings at similar levels to natives, suggesting that in general, antifouling coatings do not favor invasive species. We found that zinc-based antifouling coatings were similar and in some cases better performing than copper, despite the generally lower toxicity of zinc to aquatic organisms compared with copper. The performance of zinc-based coatings, moreover, was not directly related to the amount of zinc released into the water or their zinc content. Nano-based coatings did not offer any clear advantages over non-nano coatings, either in the degree of Zn leaching or fouling suppression. Coating matrix properties clearly are an important factor affecting the efficacy and biocide leaching rate of antifouling coatings.