A Rapid Verification System for Automatic Emergency Braking Control Algorithm of Passenger Car

The automatic emergency braking (AEB) system of the passenger car is responsible for auxiliary braking judgment and decision-making in an emergency. Due to the inevitable pressure response delay of passenger car pneumatic braking systems, a large number of verification tests should be carried out to propose appropriate strategies and algorithms. To realize the rapid verification of the AEB control algorithm, a verification system integrating software-in-the-loop (SIL) and hardware-in-the-loop (HIL) was proposed for a two-axle passenger car. It can verify the logic feasibility of the control algorithm through SIL testing, and can verify the implementation effect of the control algorithm through HIL testing. The verification system is composed of IPG, dSPACE, and a pneumatic braking bench. Considering the influence of pneumatic braking delay, it is well-matched with the actual vehicle AEB system. The AEB hierarchical control algorithm was verified under three typical test conditions. The results show that the SIL testing results of speed and relative distance are in good agreement with the HIL testing results, and the average relative deviation of relative distance is only 1.7 m. The single test time of the SIL testing is about 228 s, which can meet the requirements of rapid verification of the AEB control algorithm of the passenger car.