New application of saline contrast-enhanced electrical impedance tomography method for right ventriculography besides lung perfusion: detection of right-to-left intracardiac shunt

Summary Aim Saline contrast-enhanced electrical impedance tomography (EIT) has been used to identify the respiratory failure etiologies through assessment of regional lung perfusion at the bedside. In this study, we introduce a novel approach to detect right-to-left intracardiac shunt based on the center of heart (CoH) parameter determined from the early phase of impedance–time curve after saline bolus injection. Methods and result The timepoints when the saline bolus enter the heart (T0) and the lung regions (T1) are identified at first. A moving time window from T0 to T1 is then generated with steps of 0.5 s and the slope of the impedance–time curve in each pixel within the window calculated. CoH is calculated as the geometric center of pixel slope values in the right-to-left image direction. To illustrate how this method works in practice, we calculated the CoH values at T0 to T1 in 10 control hypoxic patients with no right-to-left shunt. In addition, we examined two critically ill patients with right-to-left intracardiac shunt. One was postcardiac surgery patient who had a residual atrial septal defect by color doppler of transesophageal echocardiograph. The other patient had a congenital heart disease of ventricular septal defect by color doppler of trans-thoracic echocardiography. A large difference in CoH between T0 to T1 was observed in the two patients with intracardiac shunt than in the control patients (11.06 ± 3.17% vs. 1.99 ± 1.43%, P = 0.030). Conclusion Saline bolus EIT for lung perfusion might be used as ventriculography to identify the right-to-left intracardiac shunt at the bedside.