Superior interface adhesion and protective mechanism of room-temperature-curable polymer composite coating on engineering substrates with lower roughness

In view of the technology bottleneck of the adhesion failure of traditional functional protective coatings on the smoother surface of precise parts served in the marine atmosphere, a room-temperature-curable fluoropolymer/polyurethane (denoted as RFP) polymer composite coating of 20-30 μm is prepared on the metal substrates. Static pull-off and dynamic friction test methods are used to evaluate the interface adhesion of the coating. The coating shows superior adhesive strength of 18-24 MPa on a variety of metal substrates with a wide range of surface roughness (Ra=0.1-1.6 μm). The friction coefficient of the coating surface is about 0.05-0.08, and the wear life is up to 9-12 km/μm. Furthermore, the adhesion strength of the coating remains 12-14 MPa after 1600 h of salt spray while the wear life of the coating keeps 3-9 km/μm after 720 h of salt spray. The influences of surface roughness , surface free energy (), surface potential of the metal substrates and the bonding force at substrate-coating interface on the adhesive energy are discussed, and the mechanism of "physical-chemical-surface" synergetic enhanced interface adhesion is proposed. The RFP coating is used as the intermediate layer for traditional PU and EP coatings to improve their adhesion on smooth aluminum substrate from 1.39 MPa to 17.5 MPa (increased by 1260%). Thus, the polymer coating has the potential to provide technical support for the development of long-term anticorrosive coating technology for precision components of marine high-tech equipment.