Impact of monolayer WS2 surface properties on the gate dielectrics formation by atomic layer deposition

Two-dimensional transition metal dichalcogenides (2D TMDs), such as MoS2 and WS2, have emerged as promising channel materials for future generation transistors. However, carbon-based surface contaminants pose a significant challenge in the formation of high-quality metal–oxide–semiconductor gate stacks for 2D TMDs. Carbon-based surface contaminants are known to be present even on directly grown 2D TMDs that have not been in contact with polymers. These organic contaminants affect precursor adsorption during atomic layer deposition (ALD) of gate dielectrics on 2D TMDs and as such the 2D-dielectric interface. This study examines the effectiveness of predeposition annealing in mitigating carbon-based contaminants while maintaining the integrity of a directly grown WS2 monolayer on a SiO2 substrate. We show that a WS2 monolayer on a SiO2/Si substrate remains stable during vacuum annealing at temperatures up to 400 °C. Water contact angle measurements and x-ray photoelectron spectroscopy confirm that the surface concentration of carbon starts to decrease at 150 °C. Thermal anneal improves the surface coverage of Al2O3 for both conventional chemisorption-based ALD and physisorbed-precursor-assisted ALD processes by facilitating more effective Al2O3 nucleation on the WS2 monolayer. The impact of predeposition anneal on the Al2O3 growth behavior in both processes can be explained by changes in surface contaminant levels. Our results underscore the importance of surface pretreatment in dielectric deposition on 2D TMDs and demonstrate that predeposition anneal is an effective method to enhance ALD-based dielectric deposition on directly grown 2D TMDs.