The Effectiveness of Ni-Based Bimetallic Catalysts Supported by MgO-Modified Alumina in Dry Methane Reforming

Syngas is produced through the carbon dioxide reforming of methane. The traditional nickel-based catalysts are substantially destroyed by carbon deposition. The reforming reaction was conducted in a tubular microreactor at 700 °C using bimetallic Ni catalysts supported over 37% Al2O3 and 63% MgO mixtures. The impregnation process formed the catalysts, which were subsequently examined by N2-physisorption, XRD, H2-TPR, TGA, and Raman spectroscopy. The 2.5Ni+2.5Co/37%Al2O3+63%MgO bimetallic catalyst, which displayed 72% and 76% conversions of CH4 and CO2 over the course of a seven-hour procedure, was discovered to be the most active in DRM. The bimetallic catalyst with the largest weight loss in TGA, 2.5Ni+2.5Fe-MG63, had a loss of 61.3%, a difference of 26% and 21% in the activity performance of CH4 and CO2, respectively, of the tested bimetallic Ni catalysts was recorded. The long-time of 30 h on-stream CH4 and CO2 conversion reactions for 2.5Ni+2.5Co-MG63 and 2.5Ni+2.5Ce-MG63 catalysts showed the catalysts’ high stability. The TPO analysis for the 2.5Ni+2.5Cs-MG63 catalyst showed a peak at 650 °C, attributed to the oxidation of the filamentous carbon, whereas the TPO analysis for the 2.5Ni+2.5Co-MG63 catalyst depicted a peak at 540 °C, ascribed to the presence of amorphous/graphite carbon.