Effect of turbulence-induced sediment resuspension and sedimentation on underwater wireless optical communication

In real-life marine environments, the composition and grain size of suspended sediments and the resuspension and sedimentation of sediments caused by turbulence may have a significant impact on underwater wireless optical communication (UWOC). However, to date, researchers have not conducted quantitative research on this issue. To this end, we innovatively study the effects of different compositions and grain sizes of suspended sediments on UWOC and the effects of turbulence-induced sediment resuspension and sedimentation on UWOC in this paper. Quartz and kaolin with different grain sizes are used to simulate sediments in seawater. An oscillating grid that can vary frequency and stroke is used to generate turbulence of different intensities. By comparing the turbidity and optical power density of different simulated sediments with different grain sizes, we find that the smaller the grain size of the simulated sediments, the higher the bit error rate (BER) under the same turbidity. But different simulated sediments with different grain sizes have similar effects on BER performance under the same optical power density. Therefore, turbidity can be used to characterize the changes of underwater channels, and optical power density can be used to evaluate the attenuation of light at the receiving end after transmission through the underwater channel. By continuously changing the frequency of the grid to cause the sediments to resuspend and sink, we prove that the process of turbulence-induced sediment resuspension and sedimentation can seriously affect the BER performance. The larger the frequency of the grid, the greater the turbulence intensity and the worse the BER performance. This study lays a foundation for the practical application of UWOC in mobile ocean observation networks.