材料科学
涂层
水分
复合材料
水蒸气
聚氨酯
传输速率
透气比表面积
含水量
磁导率
传输(电信)
化学
岩土工程
图层(电子)
工程类
电气工程
有机化学
生物化学
膜
作者
Antonio Copak,Vlatka Jirouš-Rajković,Vjekoslav Živković,Josip Miklečić
标识
DOI:10.1080/17480272.2022.2106582
摘要
Knowing the properties of wood-based building materials is essential for their proper use. Moisture transfer properties of building materials are crucial to proper building design and the prevention of moisture-related problems. In selecting materials for the building, it is important to know their water vapour transmission properties. In this research the water vapour transmission properties of uncoated and coated particleboard, oriented strand board (OSB) and birch plywood were studied using wet cup method and a moisture gradient in the samples was additionally measured. The water vapour transmission rate of free films of three commercial transparent coatings was also studied. Results showed that particleboard had the highest water vapour permeability and that the coatings reduced the water vapour permeability of all tested wood-based panels. Moreover, sanding increased the water vapour permeability of uncoated particleboard and OSB. The moisture gradient in all tested wood-based panels was linear. The highest water vapour transmission rate was recorded for acrylic water-borne coating, followed by polyurethane water-borne coating and the lowest for polyurethane solvent-based coating.
科研通智能强力驱动
Strongly Powered by AbleSci AI