Cations facilitate sulfidation of zero-valent iron by elemental sulfur: Mechanism and dechlorination application

The solid-solid reaction of microscale zero-valent iron (mZVI) with elemental sulfur (S0) in water can form sulfidated mZVI (S-mZVI) with high reactivity and selectivity. However, the inherent passivation layer of mZVI hinders the sulfidation. In this study, we demonstrate that ionic solutions of Me-chloride (Me: Mg2+, Ca2+, K+, Na+ and Fe2+) can accelerate the sulfidation of mZVI by S0. The S0 with S/Fe molar ratio of 0.1 was fully reacted with mZVI in all solutions to form unevenly distributed FeS species on S-mZVIs as confirmed by SEM-EDX and XANES characterization. The cations depassivated the mZVI surface by driving the proton release from the surface site (FeOH) and resulting in localized acidification. The probe reaction test (tetrachloride dechlorination) and open circuit potential (EOCP) measurement demonstrated that Mg2+ was most efficient in depassivating the mZVI and therefore promoting sulfidation. The decrease of surface proton for hydrogenolysis on the S-mZVI synthesized in MgCl2 solution also inhibited the formation of cis-1,2-dichloroethylene by 14–79% compared to other S-mZVIs during trichloroethylene dechlorination. In addition, the synthesized S-mZVIs exhibited the highest reduction capacity reported so far. These findings provide a theoretical basis for the facile on-site sulfidation of mZVI by S0 with cation-rich natural waters for sustainable remediation of contaminated sites.