法拉第效率
过电位
材料科学
阳极
电池(电)
电解质
锂(药物)
复合数
钾离子电池
化学工程
复合材料
电化学
电极
磷酸钒锂电池
热力学
功率(物理)
化学
医学
物理
工程类
物理化学
内分泌学
作者
Yu‐Kai Liao,Ru‐Shi Liu,Shu‐Fen Hu
标识
DOI:10.1021/acsami.3c06527
摘要
Next-generation lithium-ion batteries must have high energy density and safety, making the development of all-solid-state batteries imperative. One of the biggest advantages of an all-solid-state lithium-ion battery (ASSLIB) is that its alloy uses lithium metal as an anode while ignoring its flammability and other dangers. Herein, high-conductivity garnet-type Li6.75La3Zr1.75Ta0.25O12 (LLZTO) was chosen as the solid electrolyte part of an all-solid-state battery. A composite anode was formed by melting Li and MXene-MAX together, reducing the interface impedance from 566 to 55 Ω cm2. The Li-MXene|LLZTO|LFP full battery displayed a high initial discharge capacity of 163.0 mAh g-1 and a Coulombic efficiency of 97.0% and maintained 90.2% of its discharge capacity over 100 cycles, but it did not maintain a good overpotential. Therefore, the synergistic effect of Li-MXene-Pt will highly improve the performance of the full battery because of its high initial discharge capacity of 150.0 mAh g-1 and Coulombic efficiency of 95.5%, discharge capacity maintained at 93.3% over 100 cycles, and low overpotential of 0.04 V.
科研通智能强力驱动
Strongly Powered by AbleSci AI